OERLIKON MODEL B22 CNC BLADE GRINDER

 
Buy and Sell Metalworking Machinery anywhere on Earth

Home Page

Search for Machinery

Equipment Specials

Quick Contact

Sell Your Machinery

Newsletter Sign up

Visit Us on Facebook

Useful Tools


OERLIKON MODEL B22 CNC BLADE GRINDER
 
STOCK #103634

CLICK HERE TO PRINT

Click Here to Print

SPECIFICATIONS:

OERLIKON MODEL B22 CNC BLADE GRINDER
  COUNTRY OF ORIGIN SWIZERLAND
  SERIAL NUMBER 289-823
  DATE OF MFG. 1997
  STK# 103634
=======================================================
SPECIFICATIONS WHILE OBTAINED FROM SOURCES DEEMED
RELIABLE ARE SUBJECT CHANGE WITHOUT NOTICE
AND TO VERIFICATION BY BUYER:

FLOOR SPACE 157"L X 98 1/2"W X 78.8"H APPROX.
TOTAL WEIGHT APPROX. 16,808 LBS
MODULE RANGE 1.5 TO 13 MM
BAR CUTTER CROSS SECTION MIN 7.5 X 9 MM
                         MAX 16 X 20 MM
GRINDING WHEEL DIMENSIONS:    DIAMETER X WIDTH X BORE
MODULE 1.5 TO 4 MM WHEEL SIZE 400MM X 25MM X 127MM
MODULE 3.0 TO 7 MM WHEEL SIZE 400MM X 30MM X 127MM
MODULE 4.5 TO 8.5 MM WHEEL SIZE 400MM X 35MM X 127MM
MODULE 5 TO 13 MM WHEEL SIZE 400MM X 40MM X 127MM

GRINDING WHEEL SPEED 5 TO 35 METERS/SECOND
DIAMETER OF DIAMOND WHEEL 150MM
DIAMOND WHEEL TIP RADIUS 1.5 TO 4.5 MM/ R=0.5MM
                         4.5 TO 10 MM/R=1 MM
MAGAZINES FOR OERLIKON CUTTERS
20 MAGAZINES FOR 14 CUTTERS EACH SORTED INTO 3 CUTTER TYPES
MAGAZINES FOR GLEASON CUTTERS
20 MAGAZINES FOR 20 CUTTERS EACH SORTED INTO 2 CUTTER TYPES
CYCLE TIME FOR OERLIKON CUTTERS SIDE A,B,C APPROX. 2.4 MINUTES
CYCLE TIME FOR GEASON -TRI-AC CUTTERS APPROX. 2.5 MINUTES
MACHINE ACCURACY REPEATABILITY WHEN NEW
OERLIKON CROSS SECTION 7.5 X 9 MM +/- 0.006 MM FROM CUTTER TO CUTTER
+/- 0.005 MM CUTTER TO CUTTER
TRI-AC CROSS SECTION 0.4 X 0.5 +/- 0.00024" FROM CUTTER TO CUTTER +/-
0.0002" CUTTER TO CUTTER
TOTAL POWER CONNECTION 40 KVA
APPARENT POWER 25 KVA
EFFECTIVE POWER 15 KW
VOLTAGE 3 PHASE/480 VOLT/ +/- 10%
FREQUENCY 60 HZ
MOTORS
SPINDLE MOTOR FANUC 15 KW, 1,500 TO 6,000 RPM
DRESSING SPINDLE FANUC .55 KW 3,000 TO 8,000 RPM
X AXIS DRIVE MOTOR FANUC 1.4KW, 3,000 RPM
Y & Z AXIS DRIVE MOTOR FANUC 0.9 KW 3,000 RPM
A & C AND MAGAZINE MOTOR FANUC 0.5 KW 3,000 RPM
HYDRAULIC MOTOR 1.1 KW
NOZZLE FOLLOW UP MOTOR 25 WATTS
CENTRAL LUBE MOTOR 10.9 WATTS
WASTE WATER PUMP MOTOR 1.9 KW
CLEAN WATER PUMP MOTOR 2.2 KW
RINSING PUMP MOTOR 0.18 KW
BALANCING PUMP MOTOR 0.55 KW
REQUIRED AIR PRESSURE 6 BAR
HYDRAULIC UNIT CAPACITY 63 LITERS

EQUIPPED WITH:
FANUC FANUC 160-M CNC CONTROLS
JIC PANEL AND CONTROLS


WWW.HARBORMACHINERY.COM
231-526-9525



OUR ASKING PRICE.......: $Please call



Harbor Machinery Inc.           HARBOR SPRINGS, MI 49740           P:231-526-9525           F:231-526-7135           


Used Machinery Dealer